TIM-PAD

Brief Introduction

TIM-Pad provides an effective thermal interface between heat spreaders and electronic devices where uneven surface, air gaps and rough surface textures are present.TIM-Padsare supplied in pad-form over a wide range of thickness, and can be molded into complex shapes.

FC@
PROPERTIES
 FC@
UNIT
 FC@
TESTMETHOD
 S10U S12 S15 S15U S22 S22F S28 S28SS S30 S30P S30S S35S S40 S50D S51 S51M S51G S60 S70 S80 S100 S120 S150
Appearance
 -
Visual
 White/Pink
Grey
 Light Green White/Brown Dark Grey
Grey
 Light Blue Light Blue
Light Blue
 Violet Light Blue Pink Light Yellow Grey
Grey
 Black Light Yellow
Grey
 Blue Grey
Grey
 Light Grey Light Grey Light Grey
Thickness
 mm ASTM D374 0.50~10.0 0.07~10.0 0.07~10.0 0.50~10.0 0.15~10.0 0.15~10.0 0.20~10.0 0.20~10.0 0.30~10.0 0.50~10.0 0.30~10.0 0.25~10.0 0.50~10.0 0.50~10.0 0.50~10.0 0.50~5.00 0.50~10.0 0.50~10.0 0.50~10.0 0.50~5.00 0.50~4.00 0.50~4.00 0.50~4.00
ThermalConductivity
 W/m·K Hot Disk 1.00 1.20 1.50 1.50 2.20 2.20 2.80 2.80 3.00 3.00 3.00 3.50 4.00 4.80 5.10 5.10 5.10 6.00 7.00 8.00 10.0 12.0 15.0
ASTM D5470 1.00 1.20 1.50 1.50 2.20 2.20 2.80 2.80 3.00 3.00 3.00 3.50 4.00 4.80 5.10 5.10 5.10 6.00 7.00 8.00 10.0 12.0 15.0
ThermalResistance
(@1mm,20psi)		 °C·cm²/W ASTM D5470 8.00 7.50 5.33 5.33 4.09 3.64 3.21 2.86 3.00 2.58 2.67 2.29 2.00 1.88 1.76 1.76 1.57 1.50 1.29 1.13 0.90 0.75 0.60
Hardness
 Shore OO ASTM D2240 25 55 45 25 50 40 50 35 50 50 35 35 35 60 55 55 35 65 65 65 65 65 65
FlameRating
 - U.L 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0
Dielectric strength (@1MM) kV ASTM D149 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥6.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0 ≥5.0
VolumeResistivity
 Ω·cm ASTM D257 ≥1.0X1012 ≥4.0X1013 ≥5.0X1013 ≥1.0X1013 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012 ≥1.0X1011 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012
Density
 g/cm³ ASTM D792 1.60 1.75 1.85 2.15 2.60 2.60 3.00 3.00 3.00 1.6 3.0 3.1 3.1 3.2 3.2 2.8 3.1 3.25 3.3 3.5 3.4 3.3 3.6
DielectricConstant
 @1MHz ASTM D150 5.5 5.5 6.2 6.2 7.5 7.5 7.3 7.3 7.3 3.0 7.3 7.4 7.5 7.4 7.4 5.7 7.4 7.9 7.1 7.2 6.8 6.2 6.1
ServiceTemp.
 °C Nystein -60~150 -60~150 -60~150 -60~150 -60~150 -60~150 -60~150 -60~150 -60~150 -60~150 -60~150 -60~150 -60~150 -40~150 -60~150 -50~150 -60~150 -60~150 -60~150 -60~150 -40~150 -40~150 -40~150
RoHS Compliant
 - Nystein YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES