TIM-Pads

Introduction

TIM-Pad provides an effective thermal interface between heat spreaders and electronic devices where uneven surface, air gaps and rough surface textures are present.TIM-Padsare supplied in pad-form over a wide range of thickness, and can be molded into complex shapes.



TIM-Pads

Flextein™ S10

Flextein S10 is a 1.0 W/m∙K, ultra-soft and tear-proof thermal gap filler, reinforced with a coated fiberglass carrier. These materials are electrically insulating, resistant to shear and mechanical forces, recommended for applications that require a minimum amount of pressure on components. Flextein S10U & S10V, are ideal materials used in applications requiring insulation between sinks and heat high-voltage devices.

Read More

Flextein™ S12

Flextein S12 is a cost-effective, thermal gap pad, with an ideal filler blend that gives it low modulus maintaining optimal thermal performance while allowing easy handling. The natural tack on both sides of the material allows good compliance to adjacent surfaces of components, minimizing interfacial resistance.The filler allows the product to remain a cost effective solution where moderate thermal performance is acceptable.

Read More

Flextein™ S15

Flextein S15 is a very soft, freestanding thermal gap pad that is more compliant than most other materials. As a perfect blend of good thermal conductivity of 1.5 W/m·K and high conformability, this material produces low thermal resistance. The highly conformable nature of the material allows the pad to fill in air voids and air gaps between PC boards and heat sinks or metal chassis with stepped topography, rough surfaces and high stack-up tolerances.

Read More

Flextein™ S22

Flextein S22 is a thermally conductive silicone gel pad with a good combination of high thermal conductivity and compressibility. This soft gel pad provides reduced interfacial thermal resistance, along with shock absorption and ease of use. It’s unique silicone and filler combination has extremely low silicone extractables compared to many other silicone interface products. It is ideal for use to fill gaps between high-power, heat-generating components and related heat sinks, boards or chassis.

Read More

Flextein™ S28

Flextein S28 is a compliant elastomeric thermal interface material designed to provide excellent thermal performance at reasonable cost. Its soft interface pad conforms well to minimal pressure, resulting in little or no stress on mating parts. It has extremely low silicone extractables compared to many other silicone interface products and also meets NASA outgassing specification. Flextein S28 is naturally tacky, and no adhesive coating is required. It is electrically insulating, stable from -60ºC to 200ºC and is certified as UL-94 V0 in flammability rating.

Read More

Flextein™ NS150

Flextein NS150 is a 15.0 W/m∙K soft gap filler interface material with great thermal performance and high compliance. The material has extreme softness while maintaining elasticity and conformability. The inherent natural tack on both sides assists in application and allows the product to effectively fill air gaps, enhancing the overall thermal performance.

Read More

Flextein™ S80

Flextein S80 is an 8 W/m∙K soft gap filler interface material with great thermal performance and high compliance. The material has extreme softness while maintaining elasticity and conformability. The inherent Natural tack on both sides assists in application and allows the product to effectively fill air gaps, enhancing the overall thermal performance.

Read More

Flextein™ S51

Flextein S51 is a 5.1 W/m∙K soft thermal interface gap filler with great thermal performance and high compliance. The material has extreme softness while maintaining elasticity and conformability. The Inherent natural tack on both sides assists in application and allows the product to effectively fill air gaps, enhancing the overall thermal performance. It is ideal for use to fill gaps between high-power, heat-generating components and related heat sinks, boards or chassis.

Read More

Flextein™ S30

Flextein S30 is a soft gap filling material rated at a thermal conductivity of 3.0 W/m·K, the material offers exceptional thermal performance at low pressures, and it can easily fit in and adhere to most shapes and sizes of components, and makes reliable and complete physical contact. It is well suited for high performance, low-stress applications that typically use fixed standoff or clip mounting. FlexteinTM S30 is ideal for high-performance applications at low mounting pressures.

Read More

Flextein™ S28SS

Flextein S28SS is a compliant elastomeric thermal interface material designed to provide excellent thermal performance at reasonable cost. Its soft interface pad conforms well to minimal pressure, resulting in little or no stress on mating parts. It has extremely low silicone extractables compared to many other silicone interface products and also meets NASA outgassing specification. Flextein S28SS is super-flexible, super-sticky design-in material, and no adhesive coating is required. It is electrically insulating, stable from -60ºC to 200ºC and is certified as UL-94 V0 in flammability rating.

Read More

Find a product

Custom solutions

Custom solutions

Our custom solutions give you a competitive edge.

Read More

Contact Us

Contact Us

Contact us for information on our company, solutions and products.

Read More